Jump to content

Lockies S15 VVL Kicked In Yo Version 2.2

Recommended Posts

How's it guys, been a while now since I've been active on these boards but I thought it's about time I've shared with you the future of my S15

For those that may be able to cast their minds back, I had quite a large scale SR20VET S15 build here in NZ with detailed images and updates of the progress. Since this is going to be all new build I decided to create an all new build thread to update with progress and images.

The plan of attack is simple: Building a stroked SR22 block [as the title thread hints at] with the current VVL head with the aim of 500kw+. The car will still be an all street, show and track car it's always been

For those that can't cast their minds back, here is a recent image of the S15 of what it currently looks like

What I've purchased so far:

Mazworx Billet girdle

Mazworx Billet main caps

Mazworx 1/2" head studs

Mazworx 1/2" main studs

ACL GTiR 5 hole race bearings

ACL 19mm rod race bearings

Kelford 184ST camshafts








Share this post

Link to post
Share on other sites
4 hours ago, 6330 said:

Rad build man!

Cheers man, well I’d hope it to be 😂

Share this post

Link to post
Share on other sites
On 6/23/2018 at 11:17 AM, millerman said:

Cant wait

if anything like last one should be awesome

Good to see some folks still remember then since it has been a while :)

Share this post

Link to post
Share on other sites

Kelford beehive springs with titanium retainers arrived late last week alongside a P12 rocker cover with coil pack cover. Not the largest of updates but one none the less  


Next on the list is a Tomei 3" titanuim cat back and a Gen 2 PTE 6466                                                                                                                    

Edited by lockiess15

Share this post

Link to post
Share on other sites
Bit of a update for everyone, next lot of parts consisting of:
Taarks billet oil pickup
Taarks single VVL solenoid block
Genuine OEM SR20VE oil pump drive
Have also purchased a second SR20VE P11 cylinder head as I decided it would be best to start over with a second head, rather then re use my current one as I would need to be stripping it for the new valve train and replace necessary parts regardless
Edited by lockiess15

Share this post

Link to post
Share on other sites
On 5/29/2019 at 1:32 PM, 6330 said:

Any updates?

Never managed to see this, sorry mate :o

But indeed, it's been a while as I had bit of a whoops last year with the S15 as I [mostly] destroyed both 3rd and 4th in my gearbox out on track, clutch and pressure plate were both gone burgers and further towards end of last year I ended up having to get a new driveshaft and a cracked intake manifold repaired.

2019 wasn't a good year to me but a few small updates 

Taaks RWD VE relocation block

Taarks RWD VE water neck

More parts ordered to come, just waiting on back order with them 


Share this post

Link to post
Share on other sites

New parts arrival update!

Nismo thermostat

Genuine OEM water pump

Taarks power steering bracket v2

Taarks hall effect/home sensor

Cosworth 1.5mm 87mm head gasket

Genuine OEM water neck 

Genuine OEM thermostat housing cover

Genuine OEM blow by hose (rear) 

Front crank seal 

Rear crank seal

Rear crank seal retainer

Alternater bracket, alternater adjuster side bolt, alternater adjust front bolt

Water pipe heater return #1

Water pipe heater return #2




Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now